Buy and Sell

Buy / Sell / Wanted / Give Away

Contact secretary@sasmee.org.au if you wish to advertise.

---

FOR SALE
12 Inch rotary table.
Industrial standard, unmarked slotted table. 90 : 1 ratio. Fully graduated. Construction is “heavy”.
Asking price $275. Contact Bill 0466790619

---

FOR SALE
Genuine Myford lathe universal milling attachment.
Includes clamp bolts and clamps.
Condition is as new as only used once.

Asking price $75 Contact Bill. 0466790619

---

FOR SALE
7 1/4” Loco. WREN, to a design by Ken Swan.

Built to Ken Swan`s original castings and drawings.
The engine which is in running condition has a copper boiler with 4-year certification.
Engine has both a crosshead pump plus a steam pump.
Asteam takeoff for carriage braking operates from the cab. The Bum truck which is braked carries a water supply and a hand pump.
Sale includes a purpose fitted trailer [currently not registered.] adjustable full length transported plus Bum truck mover.
Included are the original drawings, wheel patterns, total fireman’s kit and sundry spares and fittings. Boiler construction photos are available.

Engine has done minimal running.

Contact Bill on 0466790619 Price is negotiable

---

FOR SALE
7 ¼ Inch Battery electric locomotive and 4-wheel Driver’s Truck
Based on the LMS experiment in Diesel shunting in 1932.
24 volts supplied by 75 A/H deep cycle batteries through a 4QD controller to a 500-watt brushless motor.
Ball race bearings on axles and drive shafts. Case hardened crank pins, meehanite bushes.
Driver’s truck rolls on ball races and is panelled in English oak with its own brake system. The locomotive has an emergency brake, lever operated and a park brake using the wheel brake shoes.
Comes complete with trolleys for both the locomotive and driver’s truck.
C’Tec battery charger included.

Asking price $8,000 ono.
Ring Jeff Schaefer on 08 8298 6927

---

FOR SALE
Milling /rotarytable tailstock $60.00
This unit is homemade, but well made. Centre height approx 100mm.
Height not adjustable without modification.
Bryan Homann 0417843945

---

FOR SALE
5″ electric locomotive. Powered by 2 350w motors. Sold ready to run just add battery.
Used 3 times. Selling as built multiple and only need 1.
Located in SA willing to help with packing and shipping if interstate buyers are interested.
Accepting offer via email.
Email: cameronDicker@gmail.com

---

FOR SALE
For Sale – CIG Transarc Junior 2 electric welder. Not new, but operational with trolley. $100 ONO
Location Carey Gully. Bryan Homann 0417 843 945

---

FOR SALE
The following set of castings will suit the 71/4g Lil Lima or the Lil Mogul,also have a set of fabricated cylinders but do not know what they were for. Also have a 39”length of 8”copper tube 3.5 millimetres thick.
Des Allen
Mob: 0425 363 480
Email: desallen2@bigpond.com

---

FOR SALE
Box set of 20 3mm thick parallels of various sizes (model number VP-018… see below) The guy in Taiwan sold me 10 instead of 1.
I’ve got 8 boxes I want to sell. All I want is cost price of $200 per box
Please call Marco on 0415701691 if interested.

---

FOR SALE
Optimum BF20LD in as new condition and comes with a steel stand,  clamp set and E32 collet set. There is not a scratch on it. A machine vice and a 240v power outlet is all you would need to be up and running. It is manufactured by a German company who have a factory in China which is managed by Germans with Chinese labour.  It appears well designed and fit and finish is superior to other Chinese products.  I suggest that you look at Hare and Forbes web site for images and specs and also the Optimum website. The current model is BF20LV but I can’t see any differences. There are also some youtube videos.
Asking Price $2,500.
Contact Terry at tandsfitton@bigpond.com

---

FOR SALE
Rivett Lathe in good working order with original owners manual. “Best Offer”.
https://www.deprecision.com/RivettLathe.com

Tim Williams
Mob: 0401 891 839
Email: timpet60@outlook.com

---

FOR SALE
Hare and Forbes surface grinder model SG-340 (single phase unit). Only 2 years old. Upgrading to a 3phase unit so no longer required.

I have added a coolant system, filter and aluminium tray to provide a better surface finish.

New the surface grinder costs $5445 plus deliver of $200 from Melbourne
The coolant system from hare and Forbes costs $385

If you have an engine crane at your house I can deliver it for free
All up worth $6000 plus new. Offers near $4000 accepted

Many thanks
Marco Arnese Phone: 0415701691
Email: kingciro@hotmail.com

---

FOR SALE:
Nearly completed 5-inch gauge LMS Mogul (Crab) 2-6-O locomotive.
Boiler, cylinders, underframe, tender all complete -some motion gear to finish.
Brass cab laser cut parts on hand. Full size drawing books etc.
Contact – Kingsley Martin 0412 836 684

---